Although LED lamps have already established a foothold in the home lighting market, their high prices are prohibitive for many ordinary consumers. Of course, there are many consumers who are willing to buy LED lamps at high prices for daily home use. So when consumers buy LED lamps, what are the points to pay attention to when using them? How to avoid erroneous use to cause damage to the lamps? Baite Lighting takes you to understand.

The following are four major precautions for using LED lamps:

First, try not to switch frequently when using lamps. Although the resistance of LED lamps is about 18 times that of ordinary fluorescent lamps, too frequent will still affect the life of the electronic components inside the LED lamp, which will affect the life of the lamp.

2. Special attention should be paid to the fact that, except for special LED lamps, ordinary LED lamps should be avoided in humid environments. The humid environment will affect the electronic components of the LED lamp driving power supply, the electronic components are wet, and the life of the lamp is shortened

Thirty-three, moisture-proof is the key to the maintenance of lighting, especially the LED lights in the bathroom and bathroom, and the kitchen's stove headlights must be installed with a moisture-proof lampshade to prevent moisture intrusion, to avoid rust damage or short circuit

4. It is best not to wash the LED lights with water, just wipe them with a dry cloth dampened with water. If you accidentally touch the water, try to wipe them dry. Do not wipe them with a wet cloth immediately after turning on the lights.

Warmly reminded:

1) The ordinary LED lamp cannot be used in the circuit of the dimmer table lamp, the delay switch and the induction switch.

2) Avoid using in high temperature and high humidity environment

3) LED lamps are mainly driven by power. Non-professionals are advised not to assemble and disassemble by themselves to avoid danger of electric shock.

4) LED lamps are generally used when the ambient temperature is 5 ～ 40 ℃.

5) Do not use polishing powder and other chemicals at the metal part of the LED lighting fixture.

6) The dust behind the LED lighting fixture should be cleaned with a dry cloth or tassel.

The above are the precautions for the use and maintenance of LED lamps. After you have purchased a satisfactory LED lamp, please strictly follow the instructions for use, otherwise the lamp will not be used normally due to incorrect use. Baite Lighting is a professional LED lighting manufacturer in Shenzhen. Welcome customers to visit our factory. Official website of Baite Lighting: http://www.belsz.com/zhaomingzhishi/