In the lighting project, most of the LED line lights are used to outline building outlines or to make digital screen effects. Its shape can be freely matched, and its practicality is also very strong. Below, follow Baite to understand the relevant knowledge of LED linear lights, and distinguish them from other LED lamps.

 LED linear light series is a high-end flexible decorative light, which is characterized by low power consumption, long life, high brightness, easy to bend, and maintenance-free. Particularly suitable for indoor and outdoor entertainment venues, building outline sketching and billboard making. According to different needs, the product has 12V, 24V, etc., the length is 30CM, 60CM, 90CM, 120CM and so on. Can also be customized according to customer specifications line lights of different specifications.

     Through color matching, static display flicker changes of 16 million colors can be realized: flickering and flickering; cross-color changing: several color temperatures are alternately changed at intervals; chasing changes: several color temperatures catch up with each other; flow function: single color temperature has Regular circulation

The most basic wiring method for led linear lights

1.Side outlet: Choose one of the two sides of the line lamp to punch a hole with a diameter equal to the wire diameter. The waterproof butt wiring is connected to the circuit board from this hole. Its advantage is that it can be seamless. There are no dark areas for docking and lighting effects, and installation is very convenient.

2.Bottom outlet: The bottom outlet is a hole with a diameter equivalent to the diameter of the line from the bottom and the bottom of the aluminum profile. The principle is the same as the side outlet. In addition to the seamless connection of the bottom line, It can hide the buttocks in the bottom position, which is more beautiful!

3. Plugging the cable: Plugging the cable is to open a cable hole from the middle of the plug at both ends of the line lamp, which is very convenient to install. The plug outlet cannot be seamlessly connected, and the aesthetics is slightly inferior to the bottom outlet.

LED line light installation sometimes has many problems, today we will talk about the reasons for the installation problems and some precautions

Installation failure reasons:

1. The lamp is damaged due to outdoor installation environment or other external factors;

2, due to pulling force, poor or poor contact with the lamp

3.The network cable and lighting cable are scratched during installation.

4. The installer directly damages the lamp during the installation process

5. Equipment is not grounded

Precautions

1.Don't smash and crash during transportation

2. Pay attention to the peeling and damage of the lighting cable during the installation.

3.Electrical equipment ground protection

4.The lamps are installed according to the drawings and models.

5. Don't pull the lamp bar with force

6. Separate and separate the strong and weak currents, connect the positive and negative power sources correctly, and make the connectors waterproof.

7, the main controller, sub-controller pay attention to dust and water